New FPM-T, No satellites

Thanks to those that helped me decide what to order for my silvopasture farm work. I ordered the FMP-T and a telescopic survey pole. Unfortunately, UPS lost my survey pole and my first attempts to use the FMP-T are not going well. I charged to device overnight, and attached it to a tripod to do some initial testing. I have been following the Quick Start Guide, but so far it is not going quickly. I am connected to it by Bluetooth with my phone using SW Maps. I get zero satellites. Tried turning everything off a couple of times, but no change so far. I don’t know why this would matter, by the device ID on the bottom is 6607 and the ID in SW Maps is 6606. Is it mislabeled? Bluetooth connection appears good.

Too bad I didn’t get delivery midweek, so I could call Juan for assistance. He has been very helpful so far. Hopefully someone in the forum will have a solution for me so I can continue learning how to use this over the weekend.

Thanks for any suggestions.

Edit:
After repeated attempts, I was able to get a Bluetooth connection. Not sure why it finally worked.

I bought a monthly PointPerfect service and after a couple hours of attempts, I am still not getting it to work. I added the PointPerfect information into SW Maps, but I keep getting a Connection Failed! message. Seems like this should be very straight forward if following instructions. Anyway, I give up for tonight.

Dan

Sorry for my late reply, I was out of town earlier this week. It sounds like you have been squared away. For future users, it sounded like the NTRIP address got populated slightly incorrectly. Here’s what you should expect to see in an NTRIP Client.

NTRIP Version: V1
NTRIP Server: ppntrip.services.u-blox.com
NTRIP Port: 2101
Mountpoint: NEAR-RTCM
PointPerfect Username: [Provided via email after checkout]
PointPerfect Password: [Provided via email after checkout]
Enable/Transmit GGA: Please confirm this option is selected in the NTRIP Client

Common gotchas:

  • The service requires the ‘GGA to Base Station’ to be selected. Not all NTRIP Clients enable this by default.
  • The username and password are pretty hard to enter by hand. We’ve complained to PointPerfect about this for years, but haven’t fixed it yet. For now, double check that the user and password are correctly entered.
  • The NTRIP Address does not need a ‘http://’ as part of the address.