How do I configure the TX2 to utilize the Galileo HAS Satellite Feed as a real time correction source?
Hi Randy (@Randy-765 ),
HAS corrections should be enabled by default on TX2. I’m trying to remember if we ever shipped product with older firmware, where that wasn’t true. If you update your firmware to the latest version and reset your settings, you can be confident it is enabled by default.
If you want to check if it is enabled, the “PPP Mode” setting is in the GNSS Settings - Constellations sub-menu. On older firmware, it was named “Galileo E6 Corrections”.
I hope this helps,
Paul